Shop By Category:  NFL | NCAA | MLB |

Popular Cornhole Decals

Already have a cornhole set?
Customize them with your favorite NFL or MLB sports decals!

Most of the decals are "removable vinyl" which means if you make a mistake applying them, they will come off without ripping....

 We recommend applying a clear coat over the Decal to ensure adhesion...

Tips for applying removable vinyl cornhole decals:

1. Make sure your cornhole boards are sanded to a very smooth feel. Use 220 grit sandpaper to attain a smooth surface.
   
2. Make a small mark on the center of your cornhole board and center the center of your cornhole decal on this mark.
3. Apply the decal smoothly and push out any air that might be trapped under the decal.. A small squeegee works really well.
4. Press down firmly on the applied decal, make sure all the edges are laying flat.
   
5. Apply two or three coats of clear coat over the decal and entire board if you desire. We prefer "Painters Touch Clear Gloss". When applying the clear coat you may notice that the coating looks cloudy. Don't worry, it will dry very clear.

1. Standard vinyl decals, unlike removable vinyl decals, offer no room for error. Once applied super sticky decals will not come off without damaging the decal. Unless you use the soap and water technique.
2. We recommend using the soap and water application process for standard vinyl decals. This is a very easy and reliable process. Simply use a spray bottle filled with water and a little soap. Hand or dish soap will work fine.
3. Spray the sticky side of the decal with the soap and water solution. Don't be afraid to use a good amount of the soap and water solution.
4. Apply the wet decal at the desired position on the board and use a squeegee to lightly remove the water from the underside of the decal.
   
5. Let the decal dry for about an hour and if you desire apply some clear coat...